 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| www..com CDB4334/8/9 Evaluation Board for CS4334/8/9 Family of Products Features l Demonstrates Description The CDB4334/8/9 evaluation board is an excellent means for quickly evaluating the CS4334/8/9 family of 24-bit, stereo D/A converters. Evaluation requires an analog signal analyzer, a digital signal source and a power supply. Analog outputs are provided via RCA connectors for both channels. The CS8414 digital audio receiver I.C. provides the system timing necessary to operate the Digital-to-Analog converters and will accept AES/EBU, S/PDIF, and EIAJ340 compatible audio data. The evaluation board may also be configured to accept external timing signals for operation in a user application during system development. ORDERING INFORMATION CDB4334, CDB4338, CDB4339 recommended layout and grounding arrangements l CS8414 Receives AES/EBU, S/PDIF, & EIAJ-340 Compatible Digital Audio l Digital and Analog Patch Areas l Requires only a digital signal source and power supplies for a complete Digital-toAnalog-Converter system I/O for Clocks and Data CS8414 Digital Audio Interface CS4334/38/39 Analog Filter Preliminary Product Information Cirrus Logic, Inc. Crystal Semiconductor Products Division P.O. Box 17847, Austin, Texas 78760 (512) 445 7222 FAX: (512) 445 7581 http://www.crystal.com This document contains information for a new product. Cirrus Logic reserves the right to modify this product without notice. Copyright (c) Cirrus Logic, Inc. 1998 (All Rights Reserved) AUG `98 DS248DB2 23 CDB4334/8/9 CDB4334/8/9 SYSTEM OVERVIEW The CDB4334/8/9 evaluation board is an excellent means of quickly evaluating the CS4334/8/9. The CS8414 digital audio interface receiver provides an easy interface to digital audio signal sources including the majority of digital audio test equipment. The evaluation board also allows the user to supply clocks and data through a 10-pin header for system development. The CDB4334/8/9 schematic has been partitioned into 7 schematics shown in Figures 2 through 8. Each partitioned schematic is represented in the system diagram shown in Figure 1. Notice that the the system diagram also includes the interconnections between the partitioned schematics. The CS8414 does not support a compatible data format for the CS4335, CS4336 or CS4337. As a result, an evaluation board is not available for these devices. However, the evaluation board does allow external generation of clocks and data, bypassing the CS8414, and will support the CS4335/36/37 in this configuration. by the CSLR/FCK jumper. This allows the CS8414 to decode the de-emphasis bit from the digital audio interface for control of the CS4334/8/9 de-emphasis filter. When the Error Information Switch is activated, the CS8414 operates in the Error and Frequency information mode. The information displayed by the LED's can be decoded by consulting the CS8414 data sheet. It is likely that the de-emphasis control for the CS4334/8/9 will be erroneous and produce an incorrect audio output if the Error Information Switch is activated and the CS4334/8/9 is in the internal serial clock mode. Encoded sample frequency information can be displayed provided a proper clock is being applied to the FCK pin of the CS8414. When an LED is lit, this indicates a "1" on the corresponding pin located on the CS8414. When an LED is off, this indicates a "0" on the corresponding pin. Neither the L or R option of CSLR/FCK should be selected if the FCK pin is being driven by a clock signal. The evaluation board has been designed such that the input can be either optical or coax, Figure 6. However, both inputs can not be driven simultaneously. CS4334/8/9 DIGITAL TO ANALOG CONVERTER A description of the CS4334/5/6/7/8/9 is included in the CS4334/5/6/7/8/9 data sheet. CS8414 DATA FORMAT The CS8414 data format can be set with jumpers M0, M1, M2, and M3, as described the CS8414 datasheet. The format selected must be compatible with the data format of the CS4334/8/9, shown in Figures 4-7 of the CS4334/8/9 datasheet. The default settings for M0-M3 on the evaluation board are given in Tables 2-4. The compatible data formats we have chosen for the CS8414 and CS4334/8/9 are: CS8414 format 2 ; CS4334 CS8414 format 5 ; CS4338 CS8414 format 6 ; CS4339 CS8414 DIGITAL AUDIO RECEIVER The system receives and decodes the standard S/PDIF data format using a CS8414 Digital Audio Receiver, Figure 5. The outputs of the CS8414 include a serial bit clock, serial data, left-right clock (FSYNC), de-emphasis control and a 256 Fs master clock. The operation of the CS8414 and a discussion of the digital audio interface are included in the CS8414 Datasheet. During normal operation, the CS8414 operates in the Channel Status mode where the LED's display channel status information for the channel selected 24 DS248DB2 CDB4334/8/9 ANALOG OUTPUT FILTER The evaluation board includes a pair of single pole passive filters and a pair of 3-pole active filters. The passive filters are provided as an example for cost-sensitive desigins. The active filters demonstrate a higher performance alternative with better out-of-band noise rejection. The passive filters, Fig. 4, have a corner frequency of approximately 95 kHz with JP3 and JP6 installed and 190 kHz without JP3 and JP6. The 3-pole active filters are shown in Fig. 3. The output filter options are selected via the Left and Right Channel filter jumpers, Fig. 2. an I/O buffer where jumpers HDR1-HDR6 determine if the transceiver operates as a transmitter or receiver. A transmit function is implemented with the HDR1-HDR6 jumpers in the 8414 position. LRCK, SDATA, and SCLK from the CS8414 will be outputs on J9. The transceiver operates as a receiver with jumpers HDR1-HDR6 in the EXTERNAL position. MCLK, LRCK, SDATA and SCLK on J9 become inputs. GROUNDING AND POWER SUPPLY DECOUPLING The CS4334/8/9 requires careful attention to power supply and grounding arrangements to optimize performance. Figure 9 shows CDB power arrangements. The CDB4334/8/9 ground plane is divided in a manner to control to digital return currents in order to minimize noise. The decoupling capacitors are located as close to the CS4334/8/9 as possible. Extensive use of ground plane fill on both the analog and digital sections of the evaluation board yield large reductions in radiated noise effects. INPUT/OUTPUT FOR CLOCKS AND DATA The evaluation board has been designed to allow the interface to external systems via the 10-pin header, J9. This header allows the evaluation board to accept externally generated clocks and data. The schematic for the clock/data I/O is shown in Figure 10. The 74HC243 transceiver functions as DS248DB2 25 CDB4334/8/9 CONNECTOR +5 V GND Digital input Optical input Digital I/O AOUTLA AOUTRA AOUTLP AOUTRP INPUT/OUTPUT input input input input input/output output output output output + 5 Volt power SIGNAL PRESENT ground connection from power supply digital audio interface input via coax digital audio interface input via optical I/O for master, serial, left/right clocks and serial data left channel analog output with 3-pole active filter right channel analog output with 3-pole active filter left channel analog output with single-pole passive filter right channel analog output with single-pole passive filter Table 1. System Connections JUMPER CSLR/FCK M0 M1 M2 M3 SCLK DEM_8414 HDR1-6 MCLK Left Channel Filter Right Channel Filter PURPOSE Selects channel for CS8414 channel status information CS8414 mode selection POSITION HI LO *Low *High *Low *Low INT *EXT *8414 DEM *8414 EXT x1 /2 Active Passive Active Passive FUNCTION SELECTED See CS8414 Datasheet for details See CS8414 Datasheet for details Internal SCLK Mode External SCLK Mode CS8414 de-emphasis De-emphasis input static high Selects CS8414 as source Digital I/O header becomes an source Selects Base Rate Mode Selects High Rate Mode Selects 3-pole active filter Selects Single-pole passive filter Selects 3-pole active filter Selects Single-pole passive filter Selects SCLK Mode Selects source of de-emphasis control Selects source of clocks and audio data Selects High-Rate or Base-Rate Modes Selects Active 3-pole or passive single-pole filter Selects Active 3-pole or passive single-pole filter *Default setting from factory Notes: The CS8414 data format requires the CS4334 to operate in the external serial clock mode. Table 2. CDB4334 Jumper Selectable Options 26 DS248DB2 CDB4334/8/9 JUMPER CSLR/FCK M0 M1 M2 M3 SCLK DEM_8414 HDR1-6 MCLK Left Channel Filter Right Channel Filter PURPOSE Selects channel for CS8414 channel status information CS8414 mode selection POSITION HI LO *High *Low *High *Low INT *EXT *8414 DEM *8414 EXT x1 /2 Active Passive Active Passive FUNCTION SELECTED See CS8414 Datasheet for details See CS8414 Datasheet for details Internal SCLK Mode External SCLK Mode CS8414 de-emphasis De-emphasis input static high Selects CS8414 as source Digital I/O header becomes an source Selects Base Rate Mode Selects High Rate Mode Selects 3-pole active filter Selects Single-pole passive filter Selects 3-pole active filter Selects Single-pole passive filter Selects SCLK Mode Selects source of de-emphasis control Selects source of clocks and audio data Selects High-Rate or Base-Rate Modes Selects Active 3-pole or passive single-pole filter Selects Active 3-pole or passive single-pole filter *Default setting from factory Notes: The CS8414 data format requires the CS4338 to operate in the external serial clock mode. Table 3. CDB4338 Jumper Selectable Options JUMPER CSLR/FCK M0 M1 M2 M3 SCLK DEM_8414 HDR1-6 MCLK Left Channel Filter Right Channel Filter PURPOSE Selects channel for CS8414 channel status information CS8414 mode selection POSITION HI LO *Low *High *High *Low INT *EXT *8414 DEM *8414 EXT x1 /2 Active Passive Active Passive FUNCTION SELECTED See CS8414 Datasheet for details See CS8414 Datasheet for details Internal SCLK Mode External SCLK Mode CS8414 de-emphasis De-emphasis input static high Selects CS8414 as source Digital I/O header becomes an source Selects Base Rate Mode Selects High Rate Mode Selects 3-pole active filter Selects Single-pole passive filter Selects 3-pole active filter Selects Single-pole passive filter Selects SCLK Mode Selects source of de-emphasis control Selects source of clocks and audio data Selects High-Rate or Base-Rate Modes Selects Active 3-pole or passive single-pole filter Selects Active 3-pole or passive single-pole filter *Default setting from factory Table 4. CDB4339 Jumper Selectable Options DS248DB2 27 CDB4334/8/9 I/O for Clocks and Data Fig 10 Digital Audio Input Fig 6 RXN RXP CS8414 Digital Audio Interface Fig 5 MCLK LRCK SCLK SDATA Power Down Fig 8 Clock Gating MCLK LRCK SCLK SDATA CS4334/38/39 Fig 2 Active Analog Filter Fig 3 Fig 7 Passive Analog Filter Fig 4 Figure 1. System Block Diagram and Signal Flow AGND R31 267K C44 3.3UF TP5 ALP ALA LEFT CHANNEL FILTER J21 1 2 3 HDR1X3 PASSIVE ACTIVE VA+5 TP1 SDATA-A FERRITE_BEAD L1 U7 C17 .1UF X7R C23 10UF TP6 DEM-/SCLK-A TP7 LRCK-A 1 2 3 4 SDATA DEM/SCLK LRCK MCLK AOUTL VA+ AGND AOUTR 8 7 6 5 TP8 MCLK-A CS4334 AGND C43 3.3UF ARP ARA RIGHT CHANNEL FILTER J22 1 2 3 HDR1X3 PASSIVE ACTIVE TP4 R12 267K AGND Figure 2. CS4334/5/6/7/8/9 28 DS248DB2 CDB4334/8/9 R2 5.9K C3 270PF COG C20 .1UF 8 VA+5 R3 ALA R24 4.75K C36 2700PF COG AGND AGND R16 1.21K C34 2700PF COG V+ 2 AGND C41 TP2 10UF J2 CON_RCA_RA 1 2 3 4 NC 1.15K 3 1 + V4 MC33202 U3 AOUTLA LEFT R27 100K AGND R5 VA+5 23.2K C21 .1UF R23 C39 10UF AGND 20K AGND AGND AGND R4 ARA R25 4.75K C37 2700PF COG AGND C40 TP3 10UF R15 1.21K + 5 J1 CON_RCA_RA 1 2 3 4 NC 1.15K 6 7 AOUTRA RIGHT MC33202 U3 C4 270PF COG R26 100K R1 5.9K C35 2700PF COG AGND AGND Figure 3. Analog Output Active Filter J4 CON_RCA_RA R18 ALP R28 10K 560 C18 1500PF COG JP3 1 C6 1500PF COG 2 3 4 NC AOUTLP LEFT AGND AGND AGND J3 CON_RCA_RA 1 R17 ARP R29 10K 560 C22 1500PF COG JP6 C5 1500PF COG 2 3 4 NC AOUTRP RIGHT AGND AGND AGND Figure 4. Analog Output Passive Filter DS248DB2 29 1 2 3 1 2 3 VA+5 C1 10UF VA HDR1X3 HDR3 GND 1 2 3 HDR1X3 HDR2 1 2 3 SCLK LRCK GND C16 .1UF VD+5 RN3 560 C26 .1UF C31 8414_DEM 1 2 3 30 HDR1X3 HDR5 MCLK HDR1X3 HDR4 VD1 HDR1X3 HDR7 1 2 M0 3 HDR1X3 HDR8 1 2 M1 3 HDR1X3 HDR9 1 2 M2 3 HDR1X3 HDR10 1 2 8414_M 3 HDR1X3 HDR11 1 2 CSLR/FCK 3 R11 VD1 10 HDR1X3 HDR1 SDATA C27 .1UF C32 CS8414_M0 U2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 VD+5 14 1UF VCC 1 U8 D1 LED_RECT 2 GND SN74HC04N D3 LED_RECT 4 3 RXP RXN CSLR/FCK C VERF CD/F1 CE/F2 CC/F0 SDATA CB/E2 ERF CA/E1 M1 /C0/E0 M0 VD+ VA+ DGND AGND RXP FILT RXN MCK FSYNC M2 SCK M3 CS12/FCK SEL U CBL CS8414 28 27 26 25 24 23 22 21 20 19 18 17 16 15 1UF CS8414_M1 VA CS8414_M2 R9 1K C33 .047UF GND D5 LED_RECT 6 5 CSLR/FCK D6 LED_RECT 8 9 GND VA+5 SW_B3W_1100 S4 D4 10 LED_RECT 11 R6 47K TP10 R7 47K ERROR & FREQ D2 12 LED_RECT 13 8414_DEM HDR1X3 HDR12 1 DEM 2 3 8414 HDR1X3 HDR13 1 INT 2 3 EXT VD1 7 GND DEM-/SCLK SCLK INT/EXT SCLK CDB4334/8/9 GND DS248DB2 Figure 5. CS8414 Digital Audio Receiver Connections CDB4334/8/9 OPTICAL INPUT DIGITAL INPUT 6 OPT1 C10 1 J5 CON_RCA_RA 3 1 2 RXP .01UF C9 .01UF L4 47UH C11 2 RXN R30 .01UF 75 5 NC 4 3 4 VD+5 TORX173 GND GND Figure 6. Digital Audio Inputs MCLK U1 VD+5 VD+5 VD+5 VD+5 GND 4 3 2 1 10 11 12 13 VCC /SET1 CLOCK1 DATA1 /RST1 /SET2 CLOCK2 DATA2 /RST2 Q1 /Q1 Q2 /Q2 GND MC74HC74AN 14 5 6 9 8 7 VD+5 J20 HDR1X3 1 2 3 C28 U5 .1UF 74LVXC4245 MCLK PD VD+5 SDATA DEM-/SCLK LRCK 22 2 3 4 5 6 7 8 9 10 C14 .1UF GND VD+5 HRM BRM VCCA VCCB T/\R A0 A1 A2 A3 A4 A5 A6 A7 GND 11 12 13 OE 1 24 B0 B1 B2 B3 B4 B5 B6 B7 21 20 19 18 17 16 15 14 R20 R21 R22 R19 R8 100K 47 47 47 47 SDATA-A DEM-/SCLK-A LRCK-A MCLK-A GND VD+5 C15 .1UF GND GND Figure 7. MCLK Divider and Clock Gating DS248DB2 31 CDB4334/8/9 VD+5 U10 LM555CM # TIMER LM555 POWER DOWN S3 SW_B3W_1100 R13 10K 2 VD+5 TRIGGER 5 CONTROL GND R14 10K 3 VD+5 C38 10UF 4 RESET 6 OUTPUT 7 PD THRESHOLD C8 .01UF DISCHARGE 8 VD+5 GND GND +VCC 1 C19 .1UF GND R10 113K VD+5 GND Figure 8. Power Down Circuitry +5V CON_BANANA GND CON_BANANA J6 Z1 J7 P6KE6V8P C12 47UF VA+5 C25 .1UF L3 FB C13 47UF AGND VD+5 GND Figure 9. Power Supply 32 DS248DB2 CDB4334/8/9 7 8 9 10 11 U4 74HC243 GND B4 B3 B2 B1 VCC A4 A3 A2 A1 GBA /GAB 6 5 4 3 13 1 9 7 5 3 1 10 8 6 4 2 MCLK SCLK LRCK SDATA GND MCLK SCLK LRCK SDATA 8414 EXTERNAL CLK SOURCE HDR1X3 HDR6 J9 HDR5X2 VD+5 14 GND C24 .1UF VD+5 GND DIGITAL I/O 1 2 3 DS248DB2 GND Figure 10. I/O for Clocks and Data 33 CDB4334/8/9 Figure 11. Silkscreen Top 34 DS248DB2 CDB4334/8/9 Figure 12. Top Side DS248DB2 35 CDB4334/8/9 Figure 13. Bottom Side 36 DS248DB2 |
Price & Availability of CDB4334
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |